Geomembrane Welding Machine HDPE Sheet Wedge Welder PVC Repairing Welding Machine Plastic Layer Sealing Tool

• Customization: Available
• Application: Household Appliances, Garden Supplies, Decoration
• Cooling Way: Air Cooling
• Model NO.: JC-1600HT
• Control: Manual
• Frequency Range: Low Frequency
• Electric Current: DC
• Style: Handheld
• Power: Handle
• Transport Package: Paper Box
• Specification: 100 x 220 *280
• Trademark: No
• Origin: China

Product Description

Geomembrane Welding Machine HDPE Sheet Wedge Welder PVC Repairing Welding Machine Plastic Layer Sealing Tool  Hot Wedge Welder HDPE Sheet Plastic Pond Liner

Product introduction
The automatic banner welding machine is designed to weld plastic materials. It can weld advertising inkjet fabric, inkjet cloth, light box cloth,PVC banner cloth,plastic cloth, tarpaulin and other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted. It is small, light and easy to operate. It is equipped with temperature feedback sensor. The sener can always monitoring the temperature of the outlet to keep a constant temperature. 
 
It uses advanced PID control technology, and adjust the power to make the temperature more constant 
automatically,the fluctuation is within 1 degrees. This function can make the welding result stronger. It also 
can avoid leakage. This machine is more suited to fast welding of large roofs.
 
Technical Parameters

Voltage/Frequency	110V/220V / 50 Hz/60Hz
Rated power	2000W
Air volume	21m³/h
Air pressure	2500 Pa
Welding temperature	20-650 degree
Welding speed	0.8-9.5 m/min
Welding thickness	0.2-4mm
Welding width	2-4cm
Net weight	14Kg
Packing Size(L*W*H)	485*285*280mm

 
Operation Step:
1. Make the cloth for seaming flat and put it underneath.Fix both ends by adhesive tape or something else.
2. The overlap width of the two pieces is about 3 mm,the width of the nozzle of hot seaming machine.
3. Put the machine nozzle between two overlap pieces, the press wheel should be at left side of nozzle.The nozzle also need align with side of upper piece of cloth.
4. Switch on the motor power and then adjust speed.
5. Turn on the movement switch.
6. Press heating power key to adjust temperature.
7 Turn the bar by anticlockwise to fix the position to startup automatic movement.The machine will go along with the overlap path by itself.
8. Turn the bar by clockwise to cease the automatic work.
9. The operator should control the moving direction and make sure the nozzle connect both with upper and under piece cloth.
Specifications:
Input voltage: 220V
Frequency: 50HZ
Power: 1300W/80OW
Welding speed: 0.5-5m/min"
Heating temperature: 0-450°C
Welding thickness: rubber wheel 0.2-2.0mm, steel wheel 1.0-2.0mm
Lap width: 10cm
Weld width: 17mm*2, cavity 12mm
Welding strength: ≥85% base metal (shear tensile)
Machine weight: 5KG


Note:Size and color may be slightly different due to manual measurement and different light conditions. Thanks for understanding.
Insulation registration: Class II 
01-- Standardized production
1, More than 10 years of experience in welding equipment, leading industry technology.
2, all abrasive processing, high assembly precision, stable quality, long service life.
02-- Pressure regulation system
1, Japan imported high quality silicone press wheel, high temperature resistance, smooth welding effect, firm
2. The pressure can be adjusted according to the thickness of different films.
3. Steel pressure wheel is recommended for films larger than 1.5mm
03-- Heating system
High quality copper alloy heating plate, with automatic temperature control detection system, fast heating speed, heating time 1-5 seconds, accurate temperature
04-- Digital circuit control
The new generation of digital microcomputer chip control system was originally imported reliable silicon, all the production after 100% aging reliability test, stable over voltage, over current, constant power, constant temperature control system.
05-- Imported motor
Motor imported from Japan, polar carbon brush fired with precision technology,
06-- Automatic crawling system
Premium crawler system with stainless steel bearing, non - deformation, replaceable device.
07- Pressure regulation
Unique pressure adjustment mechanism, according to the film material and thickness of the different fine tuning, in order to achieve the ideal effect