Hot plate welding machine principle:
Hot plate welding machine through the PLC intelligent control of upper and lower diemovement and the welding action, high temperature hot plate movement, three aspects closely mating parts to achieve the intelligent equipment of plastic partswelding by high temperature. When welding, hot plate is arranged between the twoplastic parts, upper and lower mold movement closure, when the workpiece to live close to the heating ironing board, plastic contact surface begins to melt, afterheating time set in advance good finish, the workpiece to welding surface plastic will reach a certain melting degree, at the upper and lower mold back off, leaving the heating workpiece ironing board, heating hot plate automatically removed, thenthe upper and lower mold with two pieces of workpiece and rapid closure pressurewelded together, after cooling and solidifying time reach certain depth of the welding process and welding, finish.
The characteristics of hot plate welding machine: 1.transmission system adopts pneumatic, hydraulic drive or servo motor drive,
2. can be applied to the workpiece with different sizes, no area restrictions
3. can be applied to any welding surface, no special requirements
4. welding surfaces allows plastic residual compensation, welding strengthguaranteed
5 .according to the needs of a variety of materials, can adjust the welding procedure,smart design required to adapt to production
.
Hot plate welding machine, welding machine of plastic hot plate specifications:
Equipment type: QO-2030 QO-3050RB QO-R4060RB
Platen Size: 200*300mm 300*500mm 400*600mm
Power supply: 220V 50Hz 220V 50Hz
Drive mode: air pressure, hydraulic pressure, servo optional
The input air pressure: 0.6-1.0Mpa
Heating power: 10-70KW
The heating temperature of 300-500 DEG C
The maximum pressure: 200 300KG 500KG
Welcome to choose the hot plate welding machine, hot plate plastic welding machine, can also according to customer request custom all kinds of equipment
Specificaton
| Model |
QO-4060RB |
Drive mode |
pneumatic, hydraulic drive or servo motor drive |
| Working power supply |
3P 380V 50HZ |
Table size |
400*600mm |
| Heating power |
10-70KW |
heating temperature |
0~500 |
| maximum pressure |
400KG |
Input air pressure |
0.6-1.0Mpa |
| Control System |
PLC programmable control |
Net weight |
800KG |
){kind=link}