Product Application
High frequency speaker mesh heeling-in machine, also known as high-frequency speaker mesh buried implants or welding machine, welding machine.
Mainly the use of high frequency induction heating machine rapid heating, the horn mesh or metal pieces instantly reach the temperature of the molten plastic, and then through the machine pressure, so as to achieve the speaker mesh or metal parts embedded in the plastic or welding effect. High frequency induction heating machine referred to as high frequency machine is currently the highest heating efficiency of metal materials, the fastest, low energy-saving environmentally-friendly induction heating equipment. A wide range of applications.
Feature:
1.Easy to install: just connect the power, the product mold and the inlet and outlet pipes can be used;
2.Simple operation: a few minutes to learn;
3.Low power consumption: saving 70% more than the high-frequency equipment of the old tube, the smaller the power consumption, the smaller the workpiece;
4.Wide range of use: Can heat a variety of metal products, all kinds of shapes of metal parts (according to the shape of the workpiece to replace the removable mold), then the plastic pieces fused to achieve the effect of embedded welding.
5.The speed of use fast: the fastest heating rate of less than 1 second, the speed can be adjusted control, about 1-2 seconds;
6.Use safe: with over-voltage, over-current, overheating, water, and other alarm instructions, and automatic control and protection
7.Temperature controllable: By setting the heating time to control the temperature of the workpiece embedding depth, so that the heating temperature can be controlled to a technical point
Detailed Images
Machine Parameter
| Model |
QO-15KWLB |
| Input power |
15KW |
| Input voltage |
220V |
| Oscillation frequency |
30-80KHZ |
| Output current |
200-1200A |
| Voltage board size |
200 * 400mm |
| Maximum pressure |
200KG |
| Time control |
1-99S |
| Water temperature requirements |
40 degrees or less |
| Water pressure requirements |
0.06Mpa-0.12Mpa 7.3 L / min |
Packing:Machine packing inside is plastic films and outside is wooden case.
Our wooden case is very strong,it can bear long time shipping on the sea.
And machine with preservative film, it can stop the salt sea water enter into the machine and make the machine corrosion.
){kind=link}