I. structure features of manual push plate type high frequency welding machine:
1, push type high frequency machine adopts single head push sliding desktop operation table panel is divided into left and right sides of the push plate, mode of operation is driven by the operator or slide, push plate on both sides alternately pushed under head welding.
2. The process of high frequency welding is controlled by time. The equipment has four time system. The rise time, the down time, the welding time and the cold time are controlled respectively.
3, high frequency welding machine mainly adopts the cylinder drive two straight rail pull on the electrode plate on the operating principle, when the product is placed on the electrode, under pressure, when the compacted cast high cycle welding, achieve the welding time, and then rose to head electric in standby state.
4, push plate type high frequency welding machine output high frequency current, stable and reliable performance, the head gas pressure can be according to the needs of heat sealing welding plastic, plastic material sealing packaging requirements, optional regulation.
5, push type high frequency welding machine head is mainly applied to plate type mold mold installation, only need to install can be fixed on the plate, simple and convenient, the main advantages of flat die is mainly for high frequency mould large plastic and plastic products is heat welded or plastic blister sealing.
Two, manual push plate type high frequency melt welding machine electrical characteristics:
1, the high frequency machine is equipped with automatic over-current protection system, when the load current exceeds the limit value of high frequency, high frequency machine will automatically cut off the high frequency, high frequency mechanical vibration tube protection from damage, avoid high frequency drift caused by improper operation, the Gao Zhou wave mold and material damage to a minimum.
2, high frequency welding machine and high Q value vibration tube, high frequency band international industrial standard 27.12MHz, the output is more stable, the output rate is particularly strong, can greatly reduce the high-frequency welding time, improve the quality and yield of products.
3, high frequency plastic welding machine is equipped with a NL5557 high sensitivity spark protection device, can accurately detect sparks when the unbalanced current, increase in the current spark when, can quickly cut off the oscillation circuit in an instant spark suppression, making mould, products of raw materials and products to minimize the damage degree.
4, the assembly oscillation current adjusting device, adjusting the adjuster output power, simple and convenient adjustment, can according to the product size and the thickness of the materials needed to set the high frequency current, can control the degree of high frequency welding, welding quality to ensure product uniformity, appearance.
Three, manual push plate type high frequency welding machine specifications:
Model: QO-5KWST QO-8KWST
High frequency power: 5000W 8000W
Supply voltage: 380V 50/60HZ
Frequency: 27.12MHZ
Input power: 8KVA 15KVA
Silicon diode rectifier
Oscillator tube: 7T85RB, 7T69RB
Maximum pressure: 300KG 500KG
Electrode interval: 200mm
Size: 100mm
Upper electrode size: 200*350mm 400*600mm
Lower electrode size: 400*600mm 500*700mm
Welding time: 0---10sdjustable
Welcome to buy QIAO manual push plate type high frequency welding machine, also can be customized according to customer requirements of various specifications of equipment! Specifications are subject to change without further notice!
Audited Supplier 
){kind=link}
){kind=link}